|
Moderator
Registriert seit: 10.04.2008
Alter: 36
Beitr?ge: 4.074
Abgegebene Danke: 200
Erhielt 1.331 Danke für 153 Beiträge
Themenstarter
Downloads: 2
Uploads: 1 Nachrichten: 731
|
Ich bleibe bei exim wegen der geilen oberfläche vexim die dat alles überschaubar macht.
daher ist das tut für mich ungeeignet...
ich hatte diese version des mailservers nach einem vorhandenen Tut das mir Feudas empfohlen hat aufgesetzt... es geht ja auch alles... ausser das mails empfangen ^^
ich hab alles bis ins kleinste befolgt (auch wenns nicht viel war) und trotzdem läuft das nicht rund...
SP4C3 kannst du da evtl helfen?
wenn du vermutest dass da was schief geht...
help please ^^
sag mir was du brauchst....
da du exim erwähnt hast, hier die hauptconfig:
Klicke hier, um den gesamten Text zu sehen
Code:
######################################################################
# MAIN CONFIGURATION SETTINGS #
######################################################################
MAILMAN_HOME=/var/lib/mailman
MAILMAN_WRAP=MAILMAN_HOME/mail/mailman
MAILMAN_USER=list
MAILMAN_GROUP=daemon
# Your IP address
MY_IP = ********
# If you are using MySQL, uncomment the following two lines:
VIRTUAL_DOMAINS = SELECT DISTINCT domain FROM domains WHERE type = 'local' AND enabled = '1' AND domain = '${quote_mysql:$domain}'
RELAY_DOMAINS = SELECT DISTINCT domain FROM domains WHERE type = 'relay' AND domain = '${quote_mysql:$domain}'
ALIAS_DOMAINS = SELECT DISTINCT alias FROM domainalias WHERE alias = '${quote_mysql:$domain}'
# If you are using PGSQL, uncomment the following four lines:
#VIRTUAL_DOMAINS = SELECT DISTINCT domain || ' : ' FROM domains WHERE type = 'local'
#RELAY_DOMAINS = SELECT DISTINCT domain || ' : ' FROM domains WHERE type = 'relay'
domainlist local_domains = @ : ${lookup mysql{VIRTUAL_DOMAINS}} : ${lookup mysql{ALIAS_DOMAINS}}
domainlist relay_to_domains = ${lookup mysql{RELAY_DOMAINS}}
hostlist relay_from_hosts = localhost
trusted_users = vmail:www-data
hide mysql_servers = localhost::(/var/run/mysqld/mysqld.sock)/vexim/vexim/*****
acl_smtp_rcpt = acl_check_rcpt
acl_smtp_data = acl_check_content
acl_smtp_helo = acl_check_helo
av_scanner = clamd:/var/run/clamav/clamd.ctl
spamd_address = 127.0.0.1 783
exim_user = Debian-exim
exim_group = Debian-exim
never_users = root
host_lookup = *
rfc1413_hosts = *
rfc1413_query_timeout = 0s
ignore_bounce_errors_after = 2d
# This option cancels (removes) frozen messages that are older than a week.
timeout_frozen_after = 7d
# We also want a little more detail in our logs, helps with debugging
log_selector = +subject
######################################################################
# ACL CONFIGURATION #
# Specifies access control lists for incoming SMTP mail #
######################################################################
begin acl
.include /etc/exim4/vexim-acl-check-spf.conf
acl_check_helo:
# Include Vexim specific helo ACLs
.include /etc/exim4/vexim-acl-check-helo.conf
# This access control list is used for every RCPT command in an incoming
# SMTP message. The tests are run in order until the address is either
# accepted or denied.
acl_check_rcpt:
# Accept if the source is local SMTP (i.e. not over TCP/IP). We do this by
# testing for an empty sending host field.
accept hosts = :
# Include Vexim specific rcpt ACLs
.include /etc/exim4/vexim-acl-check-rcpt.conf
# Deny if the local part contains @ or % or / or | or !. These are rarely
# found in genuine local parts, but are often tried by people looking to
# circumvent relaying restrictions.
# Also deny if the local part starts with a dot. Empty components aren't
# strictly legal in RFC 2822, but Exim allows them because this is common.
# However, actually starting with a dot may cause trouble if the local part
# is used as a file name (e.g. for a mailing list).
deny local_parts = ^.*[@%!/|] : ^\\.
# Accept mail to postmaster in any local domain, regardless of the source,
# and without verifying the sender.
accept local_parts = postmaster
domains = +local_domains
# Deny unless the sender address can be verified.
# require verify = sender
#############################################################################
# There are no checks on DNS "black" lists because the domains that contain
# these lists are changing all the time. However, here are two examples of
# how you could get Exim to perform a DNS black list lookup at this point.
# The first one denies, while the second just warns.
#
# deny message = rejected because $sender_host_address is in a black list at $dnslist_domain\n$dnslist_text
# dnslists = black.list.example
#
# warn message = X-Warning: $sender_host_address is in a black list at $dnslist_domain
# log_message = found in $dnslist_domain
# dnslists = black.list.example
#############################################################################
# Accept if the address is in a local domain, but only if the recipient can
# be verified. Otherwise deny. The "endpass" line is the border between
# passing on to the next ACL statement (if tests above it fail) or denying
# access (if tests below it fail).
accept domains = +local_domains
endpass
verify = recipient
# Accept if the address is in a domain for which we are relaying, but again,
# only if the recipient can be verified.
accept domains = +relay_to_domains
endpass
verify = recipient
# If control reaches this point, the domain is neither in +local_domains
# nor in +relay_to_domains.
# Accept if the message comes from one of the hosts for which we are an
# outgoing relay. Recipient verification is omitted here, because in many
# cases the clients are dumb MUAs that don't cope well with SMTP error
# responses. If you are actually relaying out from MTAs, you should probably
# add recipient verification here.
accept hosts = +relay_from_hosts
# Accept if the message arrived over an authenticated connection, from
# any host. Again, these messages are usually from MUAs, so recipient
# verification is omitted.
accept authenticated = *
# Reaching the end of the ACL causes a "deny", but we might as well give
# an explicit message.
deny message = relay not permitted
# This access control list is used for content scanning with the exiscan-acl
# patch. You must also uncomment the entry for acl_smtp_data (scroll up),
# otherwise the ACL will not be used. IMPORTANT: the default entries here
# should be treated as EXAMPLES. You MUST read the file doc/exiscan-acl-spec.txt
# to fully understand what you are doing ...
acl_check_content:
# Include Vexim specific rcpt ACLs
.include /etc/exim4/vexim-acl-check-content.conf
# finally accept all the rest
accept
######################################################################
# ROUTERS CONFIGURATION #
# Specifies how addresses are handled #
######################################################################
# THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT! #
# An address is passed to each router in turn until it is accepted. #
######################################################################
begin routers
# domain_literal:
# driver = ipliteral
# domains = ! +local_domains
# transport = remote_smtp
dnslookup:
driver = dnslookup
domains = ! +local_domains
transport = remote_smtp
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
no_more
mailman_router:
driver = accept
require_files = MAILMAN_HOME/lists/$local_part/config.pck
local_part_suffix_optional
local_part_suffix = -bounces : -bounces+* : \
-confirm+* : -join : -leave : \
-owner : -request : -admin
headers_remove = X-Spam-Score:X-Spam-Report
transport = mailman_transport
ditch_maxmsgsize:
driver = redirect
allow_fail
condition = ${if >{$message_size}{${lookup mysql{select users.maxmsgsize from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.maxmsgsize > 0 \
and users.domain_id=domains.domain_id }{${value}K}fail}} {yes}{no}}
data = :fail:\n\Your message is too big.\n \
Your message was rejected because the user $local_part@$domain\n \
does not accept messages larger than \
${lookup mysql{select users.maxmsgsize from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.maxmsgsize > 0 \
and users.domain_id=domains.domain_id}{${value}K}fail} Kb.
local_part_suffix = -*
local_part_suffix_optional
retry_use_local_part
ditch_malware:
driver = redirect
allow_fail
data = :blackhole:
condition = ${if and { {match {$h_X-ACL-Warn:}{.*malware.*}} \
{eq {${lookup mysql{select users.on_avscan from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.on_avscan = '1' \
and users.domain_id=domains.domain_id}}}{1} }} {yes}{no} }
ditch_spam:
driver = redirect
allow_fail
data = :blackhole:
condition = ${if >{$spam_score_int}{${lookup mysql{select users.sa_refuse * 10 from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.on_spamassassin = '1' \
and users.domain_id=domains.domain_id \
and users.sa_refuse > 0 }{$value}fail}} {yes}{no}}
local_part_suffix = -*
local_part_suffix_optional
retry_use_local_part
ditch_hdrmailer:
driver = redirect
allow_fail
data = :blackhole:
condition = ${if eq {${lookup mysql{select count(*) from blocklists,users,domains \
where blocklists.blockhdr = 'x-mailer' \
and blocklists.blockval = '${quote_mysql:$h_x-mailer:}' \
and users.localpart = '${quote_mysql:$local_part}' \
and domains.domain = '${quote_mysql:$domain}' \
and domains.domain_id=blocklists.domain_id \
and users.user_id=blocklists.user_id}}}{1} {yes}{no}}
local_part_suffix = -*
local_part_suffix_optional
retry_use_local_part
ditch_hdrto:
driver = redirect
allow_fail
data = :blackhole:
condition = ${if eq {${lookup mysql{select count(*) from blocklists,users,domains \
where blocklists.blockhdr = 'to' \
and blocklists.blockval = '${quote_mysql:$h_to:}' \
and users.localpart = '${quote_mysql:$local_part}' \
and domains.domain = '${quote_mysql:$domain}' \
and domains.domain_id=blocklists.domain_id \
and users.user_id=blocklists.user_id}}}{1} {yes}{no}}
local_part_suffix = -*
local_part_suffix_optional
retry_use_local_part
ditch_hdrfrom:
driver = redirect
allow_fail
data = :blackhole:
condition = ${if eq {${lookup mysql{select count(*) from blocklists,users,domains \
where blocklists.blockhdr = 'from' \
and blocklists.blockval = '${quote_mysql:$h_from:}' \
and users.localpart = '${quote_mysql:$local_part}' \
and domains.domain = '${quote_mysql:$domain}' \
and domains.domain_id=blocklists.domain_id \
and users.user_id=blocklists.user_id}}}{1} {yes}{no}}
local_part_suffix = -*
local_part_suffix_optional
retry_use_local_part
ditch_hdrsubject:
driver = redirect
allow_fail
data = :blackhole:
condition = ${if eq {${lookup mysql{select count(*) from blocklists,users,domains \
where blocklists.blockhdr = 'subject' \
and blocklists.blockval = '${quote_mysql:$h_subject:}' \
and users.localpart = '${quote_mysql:$local_part}' \
and domains.domain = '${quote_mysql:$domain}' \
and domains.domain_id=blocklists.domain_id \
and users.user_id=blocklists.user_id}}}{1} {yes}{no}}
local_part_suffix = -*
local_part_suffix_optional
retry_use_local_part
virtual_vacation:
driver = accept
condition = ${if and { {!match {$h_precedence:}{(?i)junk|bulk|list}} \
{eq {${lookup mysql{select users.on_vacation from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.on_vacation = '1' \
and users.domain_id=domains.domain_id}}}{1} }} {yes}{no} }
no_verify
no_expn
unseen
transport = virtual_vacation_delivery
virtual_forward:
driver = redirect
check_ancestor
unseen = ${if eq {${lookup mysql{select unseen from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.on_forward = '1' \
and users.domain_id=domains.domain_id}}}{1} {yes}{no}}
data = ${lookup mysql{select forward from users,domains \
where localpart='${quote_mysql:$local_part}' \
and domain='${quote_mysql:$domain}' \
and users.domain_id=domains.domain_id \
and on_forward = '1'}}
# We explicitly make this condition NOT forward mailing list mail!
condition = ${if and { {!match {$h_precedence:}{(?i)junk}} \
{eq {${lookup mysql{select users.on_forward from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.on_forward = '1' \
and users.domain_id=domains.domain_id}}}{1} }} {yes}{no} }
virtual_domains:
driver = redirect
allow_fail
data = ${lookup mysql{select smtp from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and domains.enabled = '1' \
and users.enabled = '1' \
and users.domain_id = domains.domain_id}}
headers_add = ${if >{$spam_score_int}{${lookup mysql{select users.sa_tag * 10 from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.on_spamassassin = '1' \
and users.domain_id=domains.domain_id }{$value}fail}} {X-Spam-Flag: YES\n}{} }
headers_remove = ${if or { { <{$spam_score_int}{1} } \
{ <{$spam_score_int}{${lookup mysql{select users.sa_tag * 10 from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.on_spamassassin = 1 \
and users.domain_id=domains.domain_id}{$value}fail}} } \
{ eq {0}{${lookup mysql{select users.sa_tag * 10 from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.on_spamassassin = 0 \
and users.domain_id=domains.domain_id}{$value}fail}}} \
} {X-Spam-Score:X-Spam-Report} }
local_part_suffix = -*
local_part_suffix_optional
retry_use_local_part
file_transport = virtual_delivery
reply_transport = address_reply
pipe_transport = address_pipe
.include /etc/exim4/vexim-group-router.conf
virtual_domains_catchall:
driver = redirect
allow_fail
data = ${lookup mysql{select smtp from users,domains where localpart = '*' \
and domain = '${quote_mysql:$domain}' \
and users.domain_id = domains.domain_id}}
retry_use_local_part
file_transport = virtual_delivery
reply_transport = address_reply
pipe_transport = address_pipe_catchall
virtual_domain_alias:
driver = redirect
allow_fail
data = ${lookup mysql{select concat('${quote_mysql:$local_part}@', domain) \
from domains,domainalias where domainalias.alias = '${quote_mysql:$domain}' \
and domainalias.domain_id = domains.domain_id}}
retry_use_local_part
system_aliases:
driver = redirect
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
user = Debian-exim
group = Debian-exim
file_transport = address_file
pipe_transport = address_pipe
userforward:
driver = redirect
check_local_user
file = $home/.forward
no_verify
no_expn
check_ancestor
# allow_filter
file_transport = address_file
pipe_transport = address_pipe_local
reply_transport = address_reply
condition = ${if exists{$home/.forward} {yes} {no} }
group = mail
# This router matches local user mailboxes. If the router fails, the error
# message is "Unknown user".
localuser:
driver = accept
check_local_user
transport = local_delivery
cannot_route_message = Unknown user
######################################################################
# TRANSPORTS CONFIGURATION #
######################################################################
# ORDER DOES NOT MATTER #
# Only one appropriate transport is called for each delivery. #
######################################################################
# A transport is used only when referenced from a router that successfully
# handles an address.
begin transports
# This transport is used for delivering messages over SMTP connections.
remote_smtp:
driver = smtp
local_delivery:
driver = appendfile
file = /var/mail/$local_part
delivery_date_add
envelope_to_add
return_path_add
group = mail
user = $local_part
mode = 0660
no_mode_fail_narrower
virtual_delivery:
driver = appendfile
envelope_to_add
return_path_add
mode = 0600
maildir_format = true
create_directory = true
directory = ${lookup mysql{select smtp from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.domain_id = domains.domain_id}}
user = ${lookup mysql{select users.uid from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.domain_id = domains.domain_id}}
group = ${lookup mysql{select users.gid from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.domain_id = domains.domain_id}}
quota = ${lookup mysql{select users.quota from users,domains \
where localpart = '${quote_mysql:$local_part}' \
and domain = '${quote_mysql:$domain}' \
and users.domain_id = domains.domain_id}{${value}M}}
quota_is_inclusive = false
#quota_size_regex = ,S=(\d+):
quota_warn_threshold = 75%
maildir_use_size_file = false
quota_warn_message = "To: $local_part@$domain\n\
Subject: Mailbox quota warning\n\n\
This message was automatically generated by the mail delivery software.\n\n\
You are now using over 75% of your allocated mail storage quota.\n\n\
If your mailbox fills completely, further incoming messages will be automatically\n\
returned to their senders.\n\n\
Please take note of this and remove unwanted mail from your mailbox.\n"
virtual_vacation_delivery:
driver = autoreply
from = "${local_part}@${domain}"
to = ${sender_address}
subject = "Autoreply from ${local_part}@${domain}"
text = ${lookup mysql{select vacation from users,domains \
where domain='${quote_mysql:$domain}' \
and localpart='${quote_mysql:$local_part}' \
and users.domain_id=domains.domain_id}}
mailman_transport:
driver = pipe
command = MAILMAN_WRAP \
'${if def:local_part_suffix \
{${sg{$local_part_suffix}{-(\\w+)(\\+.*)?}{\$1}}} \
{post}}' \
$local_part
current_directory = MAILMAN_HOME
home_directory = MAILMAN_HOME
user = MAILMAN_USER
group = MAILMAN_GROUP
# This transport is used for handling pipe deliveries generated by alias or
# .forward files. If the pipe generates any standard output, it is returned
# to the sender of the message as a delivery error. Set return_fail_output
# instead of return_output if you want this to happen only when the pipe fails
# to complete normally. You can set different transports for aliases and
# forwards if you want to - see the references to address_pipe in the routers
# section above.
address_pipe:
driver = pipe
return_output
user = ${lookup mysql{select users.uid from users,domains where localpart = '${quote_mysql:$local_part}' and domain = '${quote_mysql:$domain}' and users.domain_id = domains.domain_id}}
group = ${lookup mysql{select users.gid from users,domains where localpart = '${quote_mysql:$local_part}' and domain = '${quote_mysql:$domain}' and users.domain_id = domains.domain_id}}
address_pipe_catchall:
driver = pipe
return_output
user = ${lookup mysql{select users.uid from users,domains where localpart = '*' and domain = '${quote_mysql:$domain}' and users.domain_id = domains.domain_id}}
group = ${lookup mysql{select users.gid from users,domains where localpart = '*' and domain = '${quote_mysql:$domain}' and users.domain_id = domains.domain_id}}
address_pipe_local:
driver = pipe
return_output
# This transport is used for handling deliveries directly to files that are
# generated by aliasing or forwarding.
address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
# This transport is used for handling autoreplies generated by the filtering
# option of the userforward router.
address_reply:
driver = autoreply
######################################################################
# RETRY CONFIGURATION #
######################################################################
begin retry
# This single retry rule applies to all domains and all errors. It specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 1 hour and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 6 hours until 4 days have passed since the first
# failed delivery.
# Domain Error Retries
# ------ ----- -------
* * F,2h,15m; G,16h,1h,1.5; F,14d,6h
######################################################################
# REWRITE CONFIGURATION #
######################################################################
# There are no rewriting specifications in this default configuration file.
begin rewrite
######################################################################
# AUTHENTICATION CONFIGURATION #
######################################################################
# There are no authenticator specifications in this default configuration file.
begin authenticators
plain_login:
driver = plaintext
public_name = PLAIN
server_condition = ${lookup mysql{SELECT '1' FROM users \
WHERE username = '${quote_mysql:$2}' \
AND clear = '${quote_mysql:$3}'} {yes}{no}}
server_set_id = $2
fixed_login:
driver = plaintext
public_name = LOGIN
server_prompts = "Username:: : Password::"
server_condition = ${lookup mysql{SELECT '1' FROM users \
WHERE username = '${quote_mysql:$1}' \
AND clear = '${quote_mysql:$2}'} {yes}{no}}
server_set_id = $1
fixed_cram:
driver = cram_md5
public_name = CRAM-MD5
server_secret = ${lookup mysql{SELECT clear FROM users \
WHERE username = '${quote_mysql:$1}'}{$value}fail}
server_set_id = $1
######################################################################
# CONFIGURATION FOR local_scan() #
######################################################################
# If you have built Exim to include a local_scan() function that contains
# tables for private options, you can define those options here. Remember to
# uncomment the "begin" line. It is commented by default because it provokes
# an error with Exim binaries that are not built with LOCAL_SCAN_HAS_OPTIONS
# set in the Local/Makefile.
# begin local_scan
# End of Exim configuration file
__________________
Schmutziges Geschirr schimmelt nicht,
wenn man es einfriert
|